Configuration for the EDC/CTMS Spark Connection

For the spark integration to work, an Admin must configure the relevant components and activate the connection. This setup requires configuration steps in both the EDC (CDMS) and CTMS vaults.

Prerequisites

• Your organization must have a CTMS (Clinical Operations) vault and an EDC (CDMS) vault.
• Your organization must use Set Subject Status rules.

Required Permissions

Users with the Vault Owner permission can perform all of these configuration actions by default. If your vault uses custom Security Profiles to allow users within your organization to access the Admin area, you must have the following permissions:

Type	Permission	Controls
Security Profile	Application: Manage Connections	Ability to access Admin > Connections and establish Connections
Security Profile	Objects: Study: Edit, Objects: Study Country: Edit, Objects: Country: Edit, Objects: Study Site: Edit	Ability to edit records in the Study, Study Country, Country, and Study Site objects

Vault EDC/CTMS Spark Connection Components

The following standard components exist for use with the Vault EDC/CTMS Spark Connection:

Connection

The following Connection record is available from Admin > Connections:

• CDMS/Clinical Operations Connection (cdms_clinops_connection__v) is available in both your CTMS vault and EDC vault.

Note that you’ll still need to establish the Vault to Vault connection before you can use it.

Integration Points

The CDMS/Clinical Operations Connection record includes the following default Integration records with standard Integration Point records in your CDMS vault:

Integration Name	Integration Point Name	Sent From	Sent To	Included Data
CTMS to CDMS Study Data	Study Transfer	CTMS	EDC	Study Number Study Phase Lifecycle State Global ID
	Study Country Transfer	CTMS	EDC	Country Study Country Name Study Number Global ID
	Study Site Transfer	CTMS	EDC	Study Site Number Site Name Lifecycle State Site Timezone Global ID
CDMS to CTMS Subject Data	Subject Transfer	EDC	CTMS	End of Study Date End of Treatment Date Enrolled Date Subject ID Randomized Date Screen Failed Date Screened Date Site Study Study Country Subject Status Withdrawn Date Global ID
CDMS to CTMS Subject Event Data	Event Definition Transfer	EDC	CTMS	Description Event Type Help Content Name Study Private Key
	Event Transfer	EDC	CTMS	DMR Date Event Date Event Definition Event Sequence Event Status Name Overdue Date Planned Date Review for DMR Review for SDV SDV Date Site Study Study Country Subject Global ID
CDMS to CTMS Protocol Deviation Data	Protocol Deviations Transfer	EDC	CTMS	Category Content (blinding__v) Date of Deviation Date Identified Description Lifecycle State Link ID Resolution Severity Status Study Study Country Study Site Sub Category Subject Subject Visit Summary
CDMS to CTMS Procedure Data	Procedures Transfer	EDC	CTMS	Study Study Country Study Site Subject Subject Visit Procedure Definition Link ID Procedure Status Procedure Date

Configuration Overview

The following tasks are required to configure the connection:

• In the CTMS vault: Add fields and a user action to the relevant objects. See details here.
• In the EDC vault: Create Set Subject Status rules for the Subject Status field if they don’t already exist.
• In the EDC vault: Create or update the Study Status and Site Status reference lookups as necessary.
• In both the CTMS and EDC vaults: Map objects, object field reference lookups, and connect any pre-existing records across both vaults.
• Establish the connection in both vaults.

For any configurations in the CTMS vault, instructions are available here.

Configure the Study & Site Status Reference Lookups

In EDC, there are Reference Lookups for the following fields:

• Study > Study Status: The Study lifecycle in CTMS maps to the Study Status picklist values in EDC.
• Site > Site Status: The Site lifecycle state in CTMS maps to the Study Status picklist values in EDC.

If your CTMS vault has custom Study or Site lifecycle states, add them as additional Reference Lookups in the EDC vault:

1. In the EDC vault, navigate to Admin > Connections > CDMS to CTMS Connection > Reference Lookups.
2. Select the study_status__v or site_status__v reference lookup.
3. Click Add.
4. For Source Key, enter the Name of the custom lifecycle state from the CTMS vault.
5. Select the appropriate Target Key in EDC. This is the Study Status that you want to associate with the custom lifecycle state.
6. Click Save.
7. Repeat these steps for all custom Study or Site lifecycle states in CTMS.

Configure the Study Phase Reference Lookup

Each Study Phase in Clinical Operations must map to a Study Phase in EDC. Because Study Phase is a system-configured field in EDC and a custom field in CTMSClinical Operations, this mapping must be configured manually:

1. In the EDC vault, navigate to Admin > Connections > CDMS to CTMS Connection > Reference Lookups.
2. Select the study_phase__v reference lookup.
3. Click Export Template.
4. Open the exported CSV file in an editor.
5. In the CTMS vault, navigate to Admin > Business Admin > Picklists and click into the Study Phase picklist.

6. Copy and paste the source name (Picklist Value Label) and source key (Picklist Value Name) to the CSV file. Ensure that you match the Picklist Value Label and name from the CTMS vault with the Picklist Value Label and name from the EDC vault. Multiple items from CTMS can map to one item in EDC. You can add custom picklist values to EDC as desired. Every picklist value from the CTMS vault should be mapped to avoid errors. The resulting CSV file may look similar to this example:

7. Save the CSV file in the editor.
8. In the EDC vault, navigate to Admin > Connections > CDMS/Clinical Operations Connection > Reference Lookups and load the reference lookup template onto the study_phase__v reference lookup.

Mapping the Country Object

Country object records must be mapped between EDC and CTMS in order to create Study Country object records:

1. In both the CTMS vault and the EDC vault, use Vault Loader to export Country object records. Ensure that you select the Include Non-editable Fields checkbox.
2. Open the resulting CSV files in an editor.
3. Use a VLOOKUP function to populate the appropriate Link field (in EDC) with the value from the Global ID field (in CTMS) in an input spreadsheet file. For more information on using a VLOOKUP function, see the documentation for your spreadsheet editor.
4. If any Countries do not automatically resolve via the VLOOKUP function, manually add them to the input spreadsheet. Any countries that exist in one vault but not the other should be created and mapped in the other vault.
5. Save the file with the completed id and link__sys columns.
6. Load the CSV file into the EDC vault.

Connecting Existing Record Data

Depending on your configuration prior to implementing this Spark Messaging connection, there may be different versions of data in each vault. This section describes what to do in each of these scenarios.

Locate the situation that most closely matches yours, click to expand it, and follow the steps.

Configuring Integration Points

Configuring the Protocol Deviations Integrations Point

You can configure your EDC vault to send protocol deviation data from EDC to your connected Study in your CTMS vault. When this feature is enabled, Vault transfers Protocol Deviations from EDC to CTMS, creating Protocol Deviations in CTMS.

To configure this integration, perform the following actions in the CTMS vault:

• Create picklist values to correspond to your Categories and Severities.
• Map your Subcategories to Categories from the PD PV Sub Categories object.
• Add Reference Lookups for the Categories, Subcategories, and Severities

Create Picklist Values

To create picklist values to correspond to your Categories and Severities:

1. In your CTMS vault, navigate to Admin > Business Admin > Picklists.
2. Select either the Protocol Deviation / Violation Category or Protocol Violation / Deviation Severity picklist. You will need to perform these steps for both picklists.
3. Click Edit.
4. For each of your Categories or Severities:
   • Enter the Picklist Value Label. This is the Label of the Category or Severity as you created it in Studio.
   • Enter the Picklist Value Name. This is the Name of the Category or Severity as you created it in Studio.
5. Click Save.

Map Subcategories to Categories

To map your Subcategories to Categories from the Protocol Deviation Sub Categories object:

1. In your CTMS vault, navigate to Admin > Business Admin > PD PV Sub Categories.
2. Click + Create.
3. For PD PV Sub Category, enter the Label of your Subcategory from EDC.
4. Select the Category to match with the subcategory. The options in this field are the picklist values you created in the Protocol Deviation / Violation Category picklist.
5. Click Save.
6. Repeat steps 2-5 for each of your Subcategories.

Add Reference Lookups

Now, you can create Reference Lookups for your Categories (in category_pdv__ctms), Subcategories (in pd_pv_subcategory__ctms), and Severities (in severity_pdv__ctms).

To add Reference Lookups:

1. In the CTMS vault, navigate to Admin > Connections > CDMS/Clinical Operations Connection.
2. Click Reference Lookups to expand that section.
3. If a Reference Lookup target object for category_pdv__ctms, pd_pv_subcategory__ctms, or severity_pdv__ctms already exists, click to open it. Otherwise, click + Add.
4. If you added a new Reference Lookup target object in step 3, select the following options in the Create Reference Lookups dialog:
   • category_pdv__ctms:
     • Reference Lookup Type: Picklist
     • Target Object: Protocol Deviation / Violation Category
   • pd_pv_subcategory__ctms:
     • Reference Lookup Type: Object
     • Target Object: Protocol Deviation Sub Category
   • severity_pdv__ctms:
     • Reference Lookup Type: Picklist
     • Target Object: Protocol Violation / Deviation Severity
5. Click + Add.
6. For Source Key, enter the Name (exact match, case-sensitive) of the Category, Subcategory, or Severity as you entered it in Studio.
7. For Target Key:
   • For category_pdv__ctms (Categories) and severity_pdv__ctms (Severities), enter the Picklist Value Name.
   • For pd_pv_subcategory__ctms (Subcategories), enter the Name of the Protocol Deviation Sub Category record.
8. Click Save.
9. Repeat these steps until you’ve added a Reference Lookup for all of your Categories, Subcategories, and Severities.

Activate the Integration

To activate the Protocol Deviation integration:

1. In the EDC vault, navigate to Admin > Connections > CDMS to CTMS Connection.
2. Click Integrations to expand that section.
3. In the list, click to open CDMS to CTMS Protocol Deviation Data.
4. Click Edit.
5. For Status, select Active to activate the integration.
6. Click Save.

Establish the Connection

Once you’ve completed the required configuration in both vaults, you can establish (activate) the connection. Once the connection is established, Vault EDC and Vault CTMS will begin sharing data.

To establish the connection:

1. In the EDC vault, navigate to Admin > Connections > CDMS to CTMS Connection.
2. From the Actions menu, select Download Connection File.
3. In the Download Connection File dialog, click Download.
4. In the CTMS vault, navigate to Admin > Connections > CDMS to CTMS Connection.
5. From the Actions menu, select Connect from File.
6. Click Choose and select the connection file you downloaded in step 3.
7. Click Continue.
8. If the connection file included a Remote Vault ID, the connection is now established. Both connection records are now in an Active state.
9. Optional: If the configuration file does not include a Remote Vault ID, an Approval Workflow will begin in both vaults. Navigate to the Connection record in each vault and click Complete.
10. Optional: In the dialog that appears, choose to Approve the connection. The connection record is now in the Approved statue. Once both vaults approve the connection, both records move to the Active state and the connection is established.